Boilermaker- Turnaround Work

Position Summary 

Boilermaker will construct iron/steel structures to specifications. They will work with the mechanical department on an industrial turnaround setting in a plant along with other miscellaneous structures involved with the turnaround. Work can involve but not limited to bolt up, dismantling, and servicing industrial equipment that is deemed to be repaired as part of the turnaround scope. 

Position Responsibilities

• Read blueprints and specification to determine the scope of work: locations, quantities, and sizes of materials required.

• Identify all tools required for tasks.

• Identify safety risks and the precautions required to eliminate those risks.

• Fabricate equipment according to blueprints or instructions from supervisors.

• Hoist equipment and tools into location via bull rigging or crane.

• Verify vertical and horizontal alignment of structural-steel members, using plumb bobs, laser equipment, transits, and/or levels.

• Connect columns, beams, and girders with bolts, following blueprints and instructions from supervisors.

• Bolt aligned structural-steel members in position for permanent riveting or bolting.

• Pull, push, or pry iron/steel equipment into approximate positions for bolting into place.

• Cut, bend, and weld iron/steel pieces, using metal shears, torches, and welding equipment.

Physical Requirements

• Employee will be required to adhere to large amounts of standing, walking, bending, squatting, sitting and lifting. 
• Will talk and hear to communicate. 
• Will use arms and hands to signal, grab, hold, turn, push, and pull:  objects, materials, controls and tools. 
• May be required to pick up, lift, carry and move up to 50lbs. 
• Will work at heights, climb ladders and stairways, and may occasionally work off of platforms/scaffolding using the appropriate fall protection requirements. 
• Must be able to work in all weather conditions (including heat, rain, cold and wind) while wearing appropriate PPE.

Will be required to wear personal protective equipment (PPE) including but not limited to: hard hat, safety glasses/spoggles, ear plugs, masks/respirators, hi-vis safety vests, leather gloves and leather steel-toed work boots

Preferred Qualifications

• Prefer experience with industrial machinery installation, repair, and maintenance of Power Generation machines and equipment.

• JVIC/Zachry ROF’ed employee.

• Former JVIC/Zachry Employee.

• Basic Computer efficiency

• Formal/technical education.

• NCCER Boilermaker

Qualification Highlights

• Must have 4+ years’ experience as a Boilermaker Helper, Boilermaker Ironworker or comparable position with Experience 

• Must possess all Knowledge Skills and Abilities for positions (see below).

• Must be able to meet all physical requirements.

• Must be able to work at heights in excess of 300 ft.

• Must have all required tools.

• Must have reliable transportation.

Required Qualifications

• Ability to take lead in erection of steel, fabrication, grid layout, rigging etc. 

• Ability to perform all job duties of craft trade.

• Ability to read, understand IFC drawings. 

• Ability to make hang list, read details off drawings, read all notes on drawings before erection, locate and understand ECN’s and holds on drawings.

• Understand when to stop production work and when a RFI needs to be initiated. 

• Read and understand craft specs and cut sheets, craft spec procedures and recommendations

• Able to locate piece marks for correct views and know how to pick out different elevations

• Being able to know the correct installation based on the orientation.

• Knowledge of symbols based on legend 

• Knowledge of all types of safe rigging practices (chokers, slings, ect.)

• Ability to dictate correct knots based on mat