Production Specialist

We Make Doors – Where they lead is up to you…

 

Job Duties & Responsibilities

1. Production:
   1. Operate the equipment in a safe and efficient manner.
   2. Mix raw materials and monitor application areas of primer and humidification water.
   3. Assist operator to monitor all operations and parameters of the prime line and take steps to resolve any irregularities while insuring maximum run time.
   4. Optimize material usage and notify operator of line needs to do so.
   5. Assure proper relief before departing – Overtime may be required.
   6. Perform booth clean ups in a safe and efficient manner.
2. Quality:
   1. Perform, interpret, and act on assigned quality tests/data.
   2. Participate in SQDCI
   3. Understand, associate, and apply line parameters and grading specifications to operational decisions.
3. Housekeeping:
   1. Perform system clean-up tasks as required.
   2. Maintain housekeeping along prime line, paint kitchen, humidification deck, and quality testing areas.
4. Communications:
   1. Communicate with operator and other personnel throughout the shift regarding skin quality and process conditions.
   2. Communicate with on coming and off going personnel to insure continuity between shifts.
   3. Communicate effectively with management regarding issues, adjustments, and changes that have taken place.  Notify them of supply issues, maintenance needs, hazards, and accidents/injuries.
   4. Maintain complete and accurate written and/or electronic records and data.
5. Maintenance:
   1. Be familiar with components, sub-systems, support systems, and terminology of the equipment.
   2. Make rounds as directed, be watchful for worn or malfunctioning equipment, and notify maintenance and management.
   3. Perform/assist in maintenance and preventive maintenance tasks to minimize downtime
6. General:
   1. Know and understand all duties and responsibilities of Operator position.
   2. Will be required to learn and understand other jobs in the department for coverage of short periods of time, including breaks, lunch and vacation.
   3. Operate a forklift and other equipment as necessary.
   4. Abide by all company policies and procedures.
   5. Maintain required tools for use on the job.
   6. Perform all other duties assigned by management.

     

Safety Analysis

Safe Work Practices:  Wear hearing protection, safety glasses, and steel toe footwear at all times. Stay aware of the job at hand and be alert for slippery floors.  Keep work area clean and free of debris.  Long hair must be tied back above collar.  Loose clothing is not allowed on plant floor including but not limited to: Dangling Pant Legs, Neck Ties, Long or Dangling Belts, and Hooded Sweatshirts.  No jewelry is allowed including but not limited to: Rings, Watches, and Necklaces. Use proper lifting techniques.  Watch for forklift traffic.  Maintain three points of contact and use caution when climbing stairs and ladders.  Only use an approved low pressure device to remove fiber and sawdust from clothing.  Lockout/Tagout all sources before working on equipment.  Avoid contact with hot steam pipes.  Comply with all safety training including but not limited to: Do not operate any equipment or tools that have missing guards or safety devices, Lockout/Tagout, Confined Space, Fall Protection, Ergonomics, Forklift, PPE, Emergency Preparedness, Hazard Communication, Electrical Safety and Blood-borne Pathogen Prevention.  Use ladders going in and out of paint kitchens. Discuss all non-routine tasks with your manager prior to start.

 

Required Personal Protective Equipment

(PPE): Eye Protection, Hearing Protection, Gloves when handling skins, and Fall Protection when working at unguarded heights above six feet or when traveling and/or operating any high lift equipment. 

Face shield and safety glasses are required:  When you are using or within 10 feet of any of the following: wire wheels, power wire brush, cut off wheel, portable grinder, bench grinder.

About JELD-WEN Holding, Inc. 

JELD-WEN Holding, Inc. (NYSE: JELD) is a leading global designer, manufacturer and distributor of high-performance interior and exterior doors, windows, and related building products serving the new construction and repair and remodeling sectors. Based in Charlotte, North Carolina, the company operates across North America and Europe. Our associates are dedicated to bringing beauty and security to the spaces that touch our lives through our market-leading product b