QAQC Mechanical Inspector

<h2>Overview / Responsibilites</h2> <p>Massy Wood is currently recruiting for a QAQC Mechanical Inspector with extensive experience in the oil and gas petrochemical industry. The QAQC Mechanical Inpsector is responsible for :</p> <p> </p> <ul> <li>Assists in the field execution of the quality assurance and quality control program by ensuring quality issues/problems within Construction/Engineering are identified, reported and rectified. Provide office support when required and not assigned to an offshore asset.</li> <li>Plans, coordinates and reports on the execution of QAQC plans within Inspection activities/findings for the Construction/Engineering Department.</li> <li>Inspect, supervise and attest key hold ITP’s points along with Subcontractors quality personnel on the field. </li> <li>Anticipate and resolve problems encountered in the field to eliminate costly rework or re-testing.</li> <li>Validates the approval, distribution and revision of procedures, Process Plans and Work / Operations Procedures for the overall Construction activity. Liaises with the Construction/Engineering Department where necessary.</li> <li>Identifies and evaluates Quality-related incidents / problems / non-conformances and initiates, recommends, and provides effective solutions where necessary.</li> <li>Responsible for the initiation, collection, disposition and retention of QA/QC records in a timely manner in accordance with documented procedures.</li> <li>Manages relationship with Sub-contracted companies to ensure compliance between subcontracted services and Client best practices.</li> <li>Liaises with HSSE representatives (internal, client &amp; external) to ensure inherent compliance of documentation with MWG and Client safety standards.</li> <li>Liaises with MWG Quality Lead, MW QAQC Coordinator, Construction Superintendent, Construction Coordinators, Field Supervisors and SPA’s as work progresses and provide activity updates in the form of a QA/QC Daily Report covering all assigned Projects.</li> <li>Perform Audit surveillance as work progresses, avoid last minute discoveries, address repetitive non-compliance and monitor implementation of corrective actions in response to the identification of non-conforming products/services through QA/QC Audits or otherwise, until the unsatisfactory condition has been rectified.</li> <li>Perform site inspections at subcontractor workshops which include but not limited to Instrument Calibration, Control Valve testing, Material inspections</li> <li>Review all inspection and testing reports for compliance, with reference to applicable industry codes and site standards/procedures.</li> <li>Liaise with the site subcontractors’ QC inspectors for the resolution of site problems.</li> <li>Review of sub-contractor procedures and quality documentation such as ITP’s, Installation and testing procedures.</li> <li>Responsibilities include conducting routine inspections to ensure code, testing, and material compliance of services and products and the standard of strike's Quality Management System.</li> <li>Responsible for performing all aspects of piping and mechanical inspection activities with minimum supervision.</li> <li>Ensure Piping and Mechanical ITP stages are followed and complied.</li> <li>Review IFC P&amp;ID's, ISO's drawings to ensure appropriate WPS are referenced with weld details and overall accuracy.</li> <li>Monitor Piping and Mechanical operations and conduct required inspections work to resolve quality related issues with workers, subcontractors, and client.</li> <li>Verify that all site activities comply with the quality codes and standards.</li> <li>Develop inspection and test programs.</li> <li>Identify and control all NCR's while correcting with remedial action.</li> <li>Review radiographic film.</li> <li>Witness all pressure testing; finalize testing documentation.</li> <li>Ensure all quality control documentation is compiled and competed in a timely matter meeting project deadlines.</li> <li>Coordinate quality site inspections with all site sub-contractors and vendors, coordinate all non-destructive testing on site, and monitor the implementation of the approved site QC plan.</li> <li>Inspect / review product material, weld quality and testing to ensure compliance with code, standards, specifications.</li> <li>Review and revise Massy Wood ITP and Quality Procedures to be in alignment with Client Requirements and specification.</li> <li>Ensure all quality control documentation is compiled and competed in a timely matter meeting project deadlines.</li> <li>Review of Cable testing records for compliance to project specification acceptance criteria.</li> <li>Participation and quality presentation in daily toolbox talks. </li> <li>Active participation in Quality improvements drives.</li> <li>Maintaining a log of items that require corrective actions and reporting such to site construction Team in a timely manner.</li> <li>Punch listing of items and communication of such to the