Cell Operator Post-Fire - Weekend 1st shift

ESSENTIAL FUNCTIONS (DUTIES) OF THE JOB:

• Correctly wand onto the shop floor data system for labor
• Read and follow appropriate product criteria, activity instruction’s, and elements
• Follow all safety precautions as spelled out in the Activity Instruction
• Use of appropriate equipment/tools (Press, Pill Heater, Belt Sander, Anneal Bake Oven, Ring Press, CNC Machines, Burr Gun, Ultra Max, Hand Tools)
• Form and finish cores per Activity instruction and product criteria
• Load anneal bake setters per product criteria, if required
• Load and unload anneal bake oven, if required
• Understanding of loading and operation of CNC machines
• Responsible for visual and dimensional quality of green cores (gauge cores)
• Visually inspect cores for unacceptable defects per the product criteria or activity instruction
• Correctly wand lot travelers and scrap after each tray and take cores to kiln truck
• Fill out OEE sheets
• Maintain clean work area and perform TPM per schedule
• Perform pre-shift die inspection and TPM checklist.
• Observe safety policies and regulations
• Maintain high attendance record
• Basic understanding of the use of dial calipers, micrometers and pin gauges
• Understand use of the HCS ‘Help Chain”
• Maintain pacing via Aussie Pace System
• Perform Problem Solving with Leadership
• Perform other duties as directed by Leadership

**The work schedule for this position is Weekend 1st shift Saturday, Sunday, +1 additional day through the week from 7am to 7pm. 

ESSENTIAL FUNCTIONS (DUTIES) OF THE JOB:

• Correctly wand onto the shop floor data system for labor
• Read and follow appropriate product criteria, activity instruction’s, and elements
• Follow all safety precautions as spelled out in the Activity Instruction
• Use of appropriate equipment/tools (10x Magnifying Glass, Brushes, Patch/Ludox, Sandpaper, Ultra Max, Diamond File, Flat File, Disc, Burr, Collet, Mandrel, Tie Bar Machine, Go/NoGo Pins, other equipment/tools as required)
• Visually inspect core for obvious scrap
• Prepare tie bar machine according to AI (if applicable)
• Cut tie bar (CTB) per product criteria (if applicable)
• Prepare CTB machine for blending using proper equipment (if applicable)
• Blend tie bar (if applicable)
• Correctly perform Post-Fire CNC Operation
• Check slot width with go/no go pins if required by product criteria (gauge cores) or if excessive finish is performed
• Visually inspect cores for unacceptable defects per the product criteria or AI such as cracks, chips, excess parting lines, negatives, crazing, and positives
• Use ceramic patch material where allowed by the product criteria, to repair cracks, chips, negatives, and crazing. Remove excess patch using brush or sandpaper
• Communicate with pre fire operators any current quality issues
• Core fill slots with liquid wax per product criteria and other core prep work as called out on the product criteria such as adding standoffs
• Correctly wand lot travelers and scrap after each tray
• Maintain pacing via ½ hr x ½ hr sheets or Pace Board
• Use Pace System when applicable
• Work with Leadership on Problem Solving
• Understand use of the HCS ‘Help Chain” 
• Maintain clean work area
• Observe safety policies