Tube Line Machine Operator

A Brief Summary of This Position

This position works under the direction of the Production Supervisor or Lead Person and is responsible for set-up and operation of one-two of several activities pertaining to the Shearing, Forming, Burnishing, Buffing, Straightening, and Cut Off (Saw) of tubes produced for and by the Big Wheel line at Valmont Industries, TX. The employee will also assist as directed setup of other areas to gain knowledge of entire process.

Tube Line Machine Operator consists of learning 1-2 of the following:

• Blow Out, Burnishing, Buffing, Straightening, and Cut Off (Saw)

• Forming

• Shearing

Essential Functions

• Performs Shear, Former, Burnisher, Straightening, and Cut Off set-ups to assure optimal performance.

• Adjusts Hydraulic, Pneumatic, Mechanical, and Electrical devices.

• Initiates manual and auto cycles from Manual Controls or PLC touch panel.

• Uses pneumatic powered tools to buff/grind product to specification.

• Use SMAW/Stick and GMAW/Gas Metal arc welder to repair split seams that may occur during production.

• Performs set-up of Straightener to assure hold down cables and roller supports are located correctly for varying sizes of tubes.

• Inspects product according to Valmont and Industry Standards. Performs close visual inspection of product to discover any discontinuities not meeting Valmont and Industry Standards.

• Maintains all equipment in designated area to assure proper working condition at all times.

• Performs regular preventative maintenance on all equipment in assigned areas.

• Notifies Supervisor and/or Lead Person when assistance is required for maintenance and /or other repairs that are beyond his/her capabilities.

• Assists Maintenance personnel on performing maintenance and repair work as needed.

• Assists and/or performs set-up of other production equipment as directed by Lead Person.

• Keeps assigned area clean.

• Helps maintain housekeeping program throughout Tube Mill as directed by Lead Person.

• Maintains safety awareness and be alert at all times to detect, avoid, and/or correct unsafe conditions.

• Records and maintains data, recording setups, inspection, and product documentation.

• Operates forklift to move material in the shop areas.

• Other duties as assigned/directed.

Required Qualifications of Every Candidate (Education, Experience, Knowledge, Skills and Abilities)

• Minimum of 6 months of machine operation experience.

• Perform basic math functions such as adding, subtracting, multiplying, and dividing.

• Pass a forklift test from Valmont’s safety department.

• Read a tape measure.

• The ability to prioritize work in order and complete deadlines.

• Read and follow written and verbal instructions.

• The ability to work through and solve practical problems.

• The ability to work timely and expeditiously to deliver on-time, high quality results.

Burnisher/Buffer/Straightener/Cut Off (Saw)

• Read and write clearly

• Basic math

• Able to read O.D. tape and tape measure

• Certified to GM